opportunities you might be interested in... 0

Manufacturing Engineer II

We open up your world with every drive Would you like to work on the development of roof systems for future car models together with some of the market leaders in the automotive industry? Inalfa Roof Systems is a world leading supplier for OEM automotive roof systems and still growing strong. Are you ready to grow with us?Are you ready to shift into the next gear of your career? As Manufacturing Engineer within Inalfa you are in the driver?s seat for developing or improving new designs for equipment and fixtures to assemble automotive sunroof modules and roof systems. You will be tasked with ensuring that the manufacturing process conforms to all Inalfa Roof Systems specifications.ESSENTIAL DUTIES AND RESPONSIBILITIES include the following.?? Other duties may be assigned.Support all engineering change activities impacting the manufacturing process.Perform line balancing and labor evaluation activitiesSupport all QS 9000 requirementsEnsure all manufacturing documentation is accurate and up to dateChampion manufacturing cost reduction activities, including labor reduction initiativesInform quality engineering of any suspect of out of specification componentsAssist maintenance in set-up and improvement upon preventative maintenance plansPerform basic ergonomic analysis as requiredHelp insure that all employees enjoy the safest possible working environmentSupport the improved efficiency of the manufacturing facilitySupport the improved first time capability of the manufacturing processAssist DOE projects as necessaryOversee PER builds through the manufacturing processOversee DFM/DFA analysisSupport all CIP activitiesAssist Kaizen activities as appropriateReduce WIPMaintain one piece flowVisual managementetc.Apply Theory of Constraints through all plant wide activities SUPERVISORY RESPONSIBILITIES ? N/A IATF 16949/ ISO14001 / ISO 45001 RESPONSIBILITIES: The IATF16949and ISO14001 responsibilities listed below are required for this position.? Adhere to all IATF16949 (Quality) / ISO14001 (Environmental) / ISO 45001 (Health & Safety) procedures as related to the operations department function. QUALIFICATIONS?? To perform this job successfully, an individual must be able to perform each essential duty satisfactorily.?? The requirements listed below are representative of the knowledge, skill, and/or ability required.??? Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. EDUCATION AND/OR EXPERIENCE Bachelor?s degree (BA) from four-year college or university with emphasis in Engineering and Manufacturing related field; 0-3 years hands on experience; or equivalent combination of education and experience.?Experienced in DFA, process design, build and launch, AQP, troubleshooting, continuous improvement.Process failure modes and effects analysis experience.Background in line balancing a plus.Previous machine design and build experience.Excellent organizational, interpersonal and communication skills needed.Must be computer literate, preferably Microsoft Office and Windows. LANGUAGE SKILLS Ability to read, analyze, and interpret general business periodicals, professional journals, technical procedures, or governmental regulations.?? Ability to write reports, business correspondence, and procedure manuals.?? Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public. MATHEMATICAL SKILLS Ability to work with mathematical concepts such as probability and statistical inference, and fundamentals of plane and solid geometry and trigonometry.?? Ability to apply concepts such as fractions, percentages, ratios and proportions to practical situations. REASONING ABILITY Ability to define problems, collect data, establish facts, and draw valid conclusions.?? Ability to interpret an extensive variety of technical instructions in mathematical or diagram form and deal with several abstract and concrete variables. OTHER SKILLS AND ABILITIES Good communication skills, both written and oral Advanced PC skills AutoCAD experience PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perfume the functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to walk and to sit; use hands to manipulate objects, tools, or controls; reach with hands and arms.? The employee is occasionally required to stand, stoop, kneel, crouch, or crawl; and to talk and hear.??? The employee must occasionally lift up to 10 pounds.? Specific vision abilities include close vision, color vision, peripheral vision, depth perception and the ability to focus. WORK ENVIRONMENT?? The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. This employee regularly works in an office environment.?? Occasionally the employee works in the manufacturing area around moving mechanical equipment and is occasionally exposed to toxic or caustic chemicals.?? The noise level in the work environment is usually moderate. COMMENTS Must assume responsibility of assembly equipment design.? This involves working with customers, suppliers, and internal personnel.? Following a product development plan and meeting the timing is crucial.? The person must also support a team environment. What can you expect from us??Paid vacation.Paid sick time.Healthcare, dental, prescription drug insurance plans.Company paid and voluntary life insurance plans.Disability benefits.Our Core Values are?One Inalfa, Ownership, Ambition and Progress.?WE ARE IN IT TO WIN IT!Does this sound interesting to you? Don't hesitate and submit your application today.LocationCherokee AssemblyTime TypeFull timeContact PersonKeri Martin
Acworth, US
Permanent

Internship-Product engineer Electronics

We open up your world with every drive Would you like to work on the development of roof systems for future car models together with some of the market leaders in the automotive industry? Inalfa Roof Systems is a world leading supplier for OEM automotive roof systems and still growing strong. Are you ready to grow with us?? Support test setup preparation e.g creation of test requests, checking test equipment, preparing cables/wire harness;? Support or independently perform SW testing (HIL);? Support or independently perform component/system tests;? Documentation e.g. spec review, creation of manuals/work instructions, test report review/creation;? General test lab support;? Problem solving;? Planning;? Key performance index maintenance and develop a good working structure.About us Inalfa Roof Systems designs, develops and manufactures sunroofs and open-roof systems for the automotive industry. We are a First-Tier supplier for brands as BMW Group, Audi, Volvo, Land Rover, and many others. Inalfa Roof Systems Group is headquartered in Venray (Limburg, close Venlo and the German border with M?nchengladbach and D?sseldorf in the area), The Netherlands, and we have a global footprint with facilities in Europe, Asia and the America?s. You?re going to work in a Project Development team which is part of the R&D department. The team is responsible for the development of projects for several customers. The European Engineering team exists of 15 engineers from multiple cultures, which makes it necessary that you need to be able to work with different cultures. Communication is very important in this team as well as with the Core team expertsThere is a good atmosphere in this team: everybody is dedicated to accomplish a good result and customer satisfaction, without losing the personal interest in each other. It?s important for this assignment that you have technical interest and are well motivated. Do you think you have got what it takes? Your main tasks and responsibilities are:Support test setup preparation e.g creation of test requests, checking test equipment, preparing cables/wire harness;Support or independently perform SW testing (HIL);Support or independently perform component/system tests;Documentation e.g. spec review, creation of manuals/work instructions, test report review/creation;General test lab support;Problem solving;Planning;Key performance index maintenance and develop a good working structure. What do we expect from you?You are an MBO 4 (secondary vocational education) or Bachelor student in Automotive Engineering, Mechatronics or Electrical Engineering;You have good technical knowledge, creativity, and practical skills;You are well motivated;You have good communication skills in Dutch and English.You are familiar with basic electronicsFamiliarity with automotive communication protocols (LIN/CAN) is a plusYou have MS Office SkillsWhat can you expect from us??Attractive working conditions and benefits.A culture focused on teamwork and solving problems together.An innovative atmosphere where new ideas are welcome!Opportunities for your personal and professional development.Our Core Values are?One Inalfa, Ownership, Ambition and Progress.?WE ARE IN IT TO WIN IT!Does this sound interesting to you? Don't hesitate and submit your application today.LocationVenray, De Amfoor, 2Time TypeFull timeContact PersonBeena Nair
Venray, NL
Intern/Trainee (Fixed Term)

Internship -Predevelopment sensors and electronics for sunroofs

We open up your world with every drive Would you like to work on the development of roof systems for future car models together with some of the market leaders in the automotive industry? Inalfa Roof Systems is a world leading supplier for OEM automotive roof systems and still growing strong. Are you ready to grow with us?About us Inalfa Roof Systems designs, develops and manufactures sunroofs and open-roof systems for the automotive industry. We are a First Tier supplier for BMW Group, Daimler, Chrysler Group, Ford, General Motors, Volkswagen, Audi, Volvo, Citro?n, Chery, Geely, Hyundai Kia, Land Rover, Renault, Nissan and many others. Inalfa Roof Systems Group is headquartered in Venray (Limburg, close Venlo and the German border with Koln and Dusseldorf in the area), The Netherlands, and we have a global footprint with facilities in Europe, Asia and the America?s.You will be working at the Global Research & Innovation department of Inalfa Roofsystems under supervision of an advanced engineer as well as in co?peration with other team members. The Global Research & Innovation department is responsible for the development of idea?s to new products and technologies for future roofsystems at Inalfa Roofsystems for the worldwide automotive market. As a department we are continuously improving our roofsystems, creating new roofsystem designs, and following the latest market trends. The developments can be focused on several aspects, for example strength, stiffness, headroom, safety, weight, costs, or adding new functions such as light, solar panels, etc?.Your main tasks and responsibilities are:Problem and data analysisRequirement setting and analysisIdea generation and selectionConcept design and developmentPrototypingAnd much more. We are always open for new creative ideas! What do we expect from you?You are a 3rd ?year Bachelor student Mechanical, electrical or automotive engineering or similar;Good technical knowledge, creativity, and strong analytical skills;Familiarity with coding in either C, C++ or Matlab/Simulink.Familiarity with automotive communication protocols (LIN/CAN/UART)Familiarity with basic electronicsYou are an enthusiastic, pro-active student with good communication skills, also in English. What can you expect from us?Attractive working conditions and self-development opportunities.High standards and professional working methods.Friendly and informal atmosphere.Innovative leader with a strong drive to win!? What we offer you We provide personal support during your internship, nice assignments, and being part of our global development team.You will receive a fee of ?385,- gross per month (40hrs, Master / Bachelor level). Additionally we provide a travel compensation of up to ?130,00 net per month (based on commuting distance). On top of that you will gain insights into a dynamic fast growing, international organization in the automotive business where there?s never a dull moment! We work for all the top Car Manufacturers in the world and the automotive industry demands the highest quality performance! What can you expect from us??Attractive working conditions and benefits.A culture focused on teamwork and solving problems together.An innovative atmosphere where new ideas are welcome!Opportunities for your personal and professional development.Our Core Values are?One Inalfa, Ownership, Ambition and Progress.?WE ARE IN IT TO WIN IT!Does this sound interesting to you? Don't hesitate and submit your application today.LocationVenray, De Amfoor, 2Time TypeFull timeContact PersonBeena Nair
Venray, NL
Intern/Trainee (Fixed Term)